Galvanized Corrugated roll forming machine / Double Layer Roll Forming Machine

Coil Feeding Equipment 

Consists of one uncoiler with capacity of 5000kgs and its base. The steel sheet is manually fed to the guiding equipment under the function of friction and traction

Guiding Equipment

Adopting guiding bar and sliding block to control the width and position of the steel sheet. The coil is guided in the correct position and passed to the roll forming equipment.

Mainframe Transmission

Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet.

Roll forming system 

The main frame of machine is welded separately and the outside wall is connected by screw after being rotoblasted on the surface.The rollers are surface-chromeplated after being machined by the exact machine tool.

Pressing equipment

After formed the shape of the tile panel, pressing the tile panel with pressing equipment which ensures the shape lasting and more beautiful.

Post Cut Equipment  

The length and blocks can be set by the buyer through the control panel, when reach the set length, the machine will cut the panel automatically. The cutting is finished under the power of hydraulic station which guarantees the precision of cutting.

Hydraulic Station

Supplies the initial power to the cuter through a closed oil tank. It is off without cutting, which can save the power.

PLC Control Panel

The electric controlling system of this machine consists of five parts: operating system, screen, PLC, transducer and strong electricity part. The controlling system of this machine are imported from Mitsubishi company of Japan. The system uses modularized structure and has convenient, reasonable, canonical wiring arrangement, and its maintenance is quite easy. The independent operating console facilitates the mutual dialogue between the operator and the machine. The operation is easy and steady and can be choosed operation by manual or automatically.

Model

WLTM

Material

Type

Pre-paited steel sheet

Thickness

0.3-0.7 mm

Yield stress

230-300 Mpa

Max.Forming speed

2-3 m/min

Roller material

45#Steel with chrome treatment

Roller driven type

Chain transmission

Controller

PLC

Operation

Touch screen and button

Hydraulic system pressure

12 Mpa

Hydraulic station motor power

5.5 KW

Main motor power

5.5KW

Total power

11 KW

Total weight

About 8000 Kg

Index error of length

10m±2mm

Voltage

380V 3 phase 60Hz or at buyer's requirement

5 tons manual un-coiler

  1                        

Pre-cutting device (manual)-optional

  1

Guiding equipment

  1

Film covring equipment

  1

Roll forming equipment

  1

Pressing equipment

  1

Post-cut equipment

  1

Hdraulic station

  1

PLC control panel

  1

Support tables

  2